Welcome to
our new Holeshot Suspension website.  		   ABN: 402 0961 7831
 
 
  HOME MOTOCROSS PRODUCTS WORKSHOP CONTACT US HSS TUNING INFO  

WE CAN HELP WITH THE FOLLOWING DISCIPLINES
• MOTOCROSS • SUPER MOTARD • ROAD BIKES • SUPERCROSS • ROAD RACING

Welcome to the HoleShot Suspension Online products, We at HoleShot Suspension
are here to supply only quality, high performance, parts and accessories’ at the best price’s
to our customers from the best suppliers our industry has to offer….
THE FOLLOWING IS AVAILABLE AT THE BEST PRICE
TO OUR CUSTOMERS SO YOU SAVE $$$$$$$$$$$$$$$$$$$
RACE TECH TOOLS

KYB 49mm FORK CAP WRENCH
Enables loosening the fork caps without
removing the handlebars. Steel
construction for superior strength.
KTM WP 50mm FORK CAP WRENCH
Fits the newer style twin chamber WP forks
with 50mm hex head cap.
SHOWA 46/50 mm
TWIN CHAMBER CAP WRENCH
Multiple applications (46/50mm): HONDA CR250, CRF450, SUZUKI RM125/250. Removes compression valving assembly on most models
 

KTM WP 48mm FORK CAP WRENCH
Fits KTM WP 48 mm forks that require a
special pin spanner wrench. Enables loosening
the fork caps without removing the handlebars.

RESERVOIR CAP REMOVAL TOOL
This tool screws onto the Schrader valve for
easy removal of the bladder cap. (Simply screw
the tool onto the Schrader valve and pull the
bladder from the body.)
SEAL DRIVERS
Fork seal drivers for inverted and conventional
forks. Many Seal Driver sizes available.
 

SHOCK PRELOAD ADJUSTING TOOL
Are you tired of chewing up your rear shock spring collars when you adjust preload? Well then we've
got the tool for you! Can be used aggressively on preload adjusting collars without damaging them

PIN SPANNERS
Pin Spanners have a unique design with a reverse taper on the pins. This helps them dig in so
they don't pop out during use. 2 sizes: 4.0 / 4.5 and 5.0 / 5.5 mm. Pins are replaceable.
TMPS 01-PIN SPANNER 4.0 & 4.5mm
TMPS P01P-REPLACEMENT PINS 4.0 & 4.5 pair
TMPS 02-PIN SPANNER 5.0 & 5.5
TMPS P02P-REPLACEMENT PINS 5.0 & 5.5 p
 

NITROGEN NEEDLE
This tool is designed for gas charged shocks
with self-sealing type rubber valves
COMPRESSION TOOL
KYB DUAL CHAMBER
This tool removes the Compression Body from
the cartridge on Twin-Chamber KYB forks.

SEAL HEAD SETTING TOOL
Four sizes available. Mini's, Standard, Street
and WP PDS shocks. Allows easy removal and installation of most shock seal head assemblies

 
SHOCK SEAL
"BULLET" TOOLS
Bullet Tools make seal head installation onto shafts quick and easy. Practically eliminates the possibility of seal
damage when installing the seal
head onto the shaft. A must for
serious tuners. They come in
different sizes. 		SHAFT HOLDING TOOLS
Holds fork damping rods, cartridges, shock
shafts, etc. Unique design allows installation
of dowels into the top of the vise jaws. The
holding tools hang on the dowels instead of dropping on the ground when the vise is opened 		SHOCK REBOUND
SEPARATOR VALVE
Rebound Separator Valve replaces the OEM
shock shaft nut with an asymmetric valve
 

SHOCK BLADDERS
We have a complete line of replacement
bladders for KYB and SHOWA shocks 		BOTTOM-OUT BUMPERS
Bottom-Out Bumpers are an often overlooked part of shock maintenance. Original equipment
bumpers start breaking down immediately. They are typically effective over 25 to 33% of the
suspension travel and particularly on a dirt bike can make a huge difference between a plush
landing and one that's not so plush.
 
SHOCK LOWERING SPACERS
Internally installed on the shock shaft to lower
the bike up to 4 inches. Not recommended for
shocks with top-out springs. For 14, 16 and
18mm shock shafts. Includes a specific
combination of 2 and 3mm thick spacers. 		SHIMS
• Highest quality spring steel.
• All major ID and OD's available.
• Packs of 10 are standard.
• Quantity breaks of 100 and 1000 available.
• 6, 8, 10, 11, 12, 14 16,18, 20, 26, 32, 36, 40mm ID's
 SEALS
In general OEM seals are the highest quality available. We stock OEM seals in most
cases. If they are not available we stock the next best choice. Many times we can save
you quite a bit because of our high volume.
 
BUSHINGS
We stock OEM Bushings only. Even if you
have a model without any available
replacements, we may have them in stock.
Call now for Product Search to find the
proper replacement.

RACE TECH GOLD VALVES GOLD VALVE SHOCK KITS
for STOCK SHOCKS
The Gold Valve Shock Kit will transform your production shock into a Custom
Tuned, High Performance Suspension Component. The Gold Valve allows us to
set your shock for your weight, riding ability and type of riding. This will give you
a factory ride for a fractin of the cost.

Race Tech does Gold Valve Shock Conversions for Ohlin’s, Penske, Fox and
most Production Shocks.

Holeshot Suspension Custom Set up Suspension will make the difference in
your quest for the next big trick! Holeshot Suspension has a valving set up for
your Free Style needs no matter the skill level. Our setup has proven results.
G2R Gold Valves
 
WHEELS AND HUBS
ALL WHEELS COMPLETE UNIT INCLUDING HUBS ANY COLOR
YOUR CHOICE OFF TALON OR RAD WHEELS AND HUBS
HOLESHOT SUSPENSION PRICE From $1495.00 per pair
SPROCKETS
HOLESHOT SUSPENSION FROM $25.00ea
  FRONT SPROCKET
HOLESHOT SUSPENSION FROM $22.00ea
 
ASV
BRAKE AND CLUTCH LEVERS (Call for price)
 
HoleShot Button $25.00ea Fuel Mixture Screws $25.00ea RHK Fuel Caps inc B/Tube Call for $
 
CLOTHING
Available on request
 
Holeshot Suspension can also supply all your bearing needs,
from the Steering Head to the Rear Wheels.
Complete kits are available
 
ROCK OIL FLUIDS
  FORK OIL 5 WT X 1LT ( Light ) = $24.00
FORK OIL 5 WT X 5LT ( Light ) = $150.00
FORK OIL 10 WT X 1LT ( Medium ) = $24.00
FORK OIL 10 WT X 5LT ( Medium ) = $150.00
 SHOCK OIL 2.5 WT X 1LT ( Light ) = $35.00
SHOCK OIL 2.5 WT X 5LT ( Light ) = $280.00
SHOCK OIL 5 WT X 1LT ( Medium ) = $35.00
SHOCK OIL 5 WT X 5LT (Medium ) = $280.00